男,1978年生,教授,博士生导师。第八届中国力学学会固体力学专业委员会断裂与木据华再实船保注疲劳专业组成员,湖北省复末确增棉计鱼兰合材料学会副理事长、湖北省力学学会常务理事。 现任武汉大学土木建筑工程学院副院长。
2003年-2006年:法国梅斯大学(Université Paul Verlaine-Metz)力学博士。
2002年-2003年:法国勃艮第大学(Univers来自ité de Bourgogne)工学硕士。
2001年-2003年:法国汽车与交通学院(Institut Supérieur de l'Automobile et des Transports)工程师学位。
2000年-2003年:武汉理工大学工学硕士。
1996年-2000年:武汉理工大学工学学士。
2016至今:武汉大学土木建筑工程学院副院长
2014至2017年:武汉大学工程力学系系主任
2011至今:武汉大学教授(破格晋升)
2007年12月201360百科1年:武汉大学土木建筑工程学院副教授。
2009年6月至9月:法国梅斯大学访问学者。
2008年6月至9月:卢森堡HENRI TUDOR研究中心访问学者。
2006至2007年:法国巴黎综合理工 (Ecole Polytechnique) 博士后。
2005年:法国梅斯大学助教。
2004至2005年:法国国立高等工艺工程师学校(Ecole Nationale Supérieure d'Arts et Métiers, ENSAM)助教。
弹性力学及有限元
结构分析程序设计
结构分析程序设计
复合材料力学
薄膜结构失稳现象研究
多尺度建模与仿来自真
复合材料结构计算
1.主持国家自然科学基金面上项目1项、青年基金1项。
2.主持"中法蔡元培项目"1项。
3.主持湖北省国际合作(中法)项目1项。
4.主持湖北省自然科学基金重点项目1项。
5.合作主持卢森堡国家科学基金国际交流项目3项。
6.主持教育部留学回国科研启动基金1项。
7.作为中方负责人参与卢森堡国家科学基分该为金核心项目1项。
2011年获湖北省第十三届自然科学优秀学术论文二等奖。
善种济停约吧2011受聘武汉大学珞珈青年学者。
2006年获得教育部颁发的"国家优秀自费留学生奖学金"。
中国力学学会第八届固体力学款责候专业委员会断裂与疲劳专业组成员
兼任Composite Structures (IF=4.101)副主编、Mechanics of Advanced Materials and Struct江ures (IF=2.645)编委、湖北省复合材料学会副理事长、湖北省力学学会常务理事。
1.Yang360百科, J., Huang, Q.打非航, Hu, H.*, Giunta, 判害组G., Belou定与千皮ettar, S., Potier-Ferry, M., 2015. A new family of fini交察备向te elements for wrinkling anal无并冲ysis of thin films on compliant substrates.Composite Structures 119, 568-577.
2.Huang, Q., Hu, H.* , Kun Y求目女u, Potier-Ferry, M., Be原艺余免louettar, S., Damil, N., 2015. Macroscopic simula灯派历浓也展独穿元tion of membrane wrinkling for various loading cases. Int式鸡肥比江序营模便婷ernational Journal of Solids and Structures 64-65, 246-258.
3.Yu, K.,Hu, H.*阿负液穿, Tang, H., Giunta, G., Potier-Ferry, M., Bel线来评毫亲夜画妒督脸ouettar, S., 2015. A novel two-dime引视备度艺nsional finite element to study the instability phenomena of san双守dwich plates. Computer Methods in Applied Mechanics and Engineering 283, 1117-1137.
4.Attipo宜门球u, K., Hu, H., Mohri, F., Potier-Ferry, M., Belouettar, S., 2015. Thermal wrinkling of thin membranes using a Fourier-related double scale approach. Thin-Walled Structures 94, 532-544.
5.Sun, X.-Y., Hu, H., Cao, C., Xu, Y.-J., 2015. Anisotropic vacancy-defect-induced fracture strength loss of graphene.RSC Advances 5, 13623-13627.
6.Xu, F., Potier-Ferry, M., Belouettar, S., Hu, H., 2014. Multiple bifurcations in wrinkling analysis of thin films on compliant substrates. International Journal of Non-Linear Mechanics, doi: 10.1016/j.ijnonlinmec.2014.12.006.
7.Xu, F., Hu, H., Belouettar, S., Potier-Ferry, M., 2014. Bridging techniques in a multi-scale modeling of pattern formation. International Journal of Solids and Structures 50, 3119-3134.
8.Damil, N., Potier-Ferry, M., Hu, H.,2013. New nonlinear multi-scale models for wrinkled membranes. Comptes Rendus Mecanique 341, 616-624.
9.Giunta, G., Koutsawa, Y., Belouettar, S., Hu, H., 2013. Analysis of nano-plates by atomistic-refined models accounting for surface free energy effect. Acta Mechanica 224, 1-21.
10.Giunta, G., Koutsawa, Y., Belouettar, S., Hu, H., 2013. Static, free vibration and stability analysis of three-dimensional nano-beams by atomistic refined models accounting for surface free energy effect. International Journal of Solids and Structures 50, 1460-1472 .
11.Yu, K., Hu, H.*, Chen S., Belouettar, S., Potier-Ferry, M., 2013. Multi-scale techniques to analyz instabilities in sandwich structures.Composite Structures 96, 751-762.
12.Mikdam, A., Belouettar, R., Fiorelli, D., Hu, H., Makradi, A., 2013. A tool for design of heterogeneous materials with desired physical properties using statistical continuum theory. Materials Science and Engineering: A 564, 493-500.
13.Liu, Y., Yu, K., Hu, H.*, Belouettar, S., Potier-Ferry, M., Damil, N., 2012. A new Fourier-related double-scale analysis on instability phenomena of sandwich structures.International Journal of Solids and Structures 49, 3077-3088.
14.Mhada, K., Braikat, B., Hu, H.,Damil, N., Potier-Ferry, M., 2012. About macroscopic models of instability pattern formation.International Journal of Solids and Structures 49, 2978-2989.
15.Biscani, F., Giunta, G., Belouettar, S., Carrera, E., Hu, H., 2012. Variable kinematic plate elements coupled via Arlequin method.International Journal for Numerical Methods in Engineering 91, 1264-1290.
16.Nasser H., Kiefer-Kamal, E.-H., Hu, H., Belouettar, S., Barkanov, E., 2012. Active vibration damping of composite structures using a nonlinear fuzzy controller, Composite Structures 94, 1385-1390.
17.Hu, H.,Damil, N., Potier-Ferry, M., 2011. A bridging technique to analyze the influence of boundary conditions on instability patterns. Journal of Computational Physics 230, 3753-3764, 2011.
18.He, Q. Z., Hu, H.*, Belouettar, S., Giunta, G., Yu, K., Liu, Y., Carrera, E., Potier-Ferry, M., 2011. Multi-scale modelling of sandwich structures using hierarchical kinematics. Composite Structures 93, 2375-2383.
19.Hu, H., Belouettar, S., Potier-Ferry, M., Makradi, A., Koutsawa, Y., 2011. Assessment of various kinematic models for instability analysis of sandwich beams. Engineering Structures 33, 572-579.
20.Biscani, F., Giunta, G., Belouettar, S., Carrera, E., Hu, H., 2011. Variable kinematic beam elements coupled via Arlequin method. Composite Structures 93, 697-708.
21.Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2010. Multi-scale nonlinear modelling of sandwich structures using the Arlequin method. Composite Structures 92, 515-522.
22.Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2009. A novel finite element for local and global buckling analysis of sandwich structures. Composite Structures 90, 270-278.
23.Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., Makradi, A., 2009. Multi-scale modelling of sandwich structures using the Arlequin method -Part I: linear modelling. Finite Element in Analysis and Design 45, 37-51.
24.Hu, H., Belouettar, S., Potier-Ferry, M., Daya, E. M., 2008. Review and assessment of various theories for modeling sandwich structures. Composite Structures 84, 282-292.
25.Hu, H., Belouettar, S., Daya, E. M., Potier-Ferry, M., 2006. Evaluation of kinematic formulations for viscoelastically sandwich beam modelling. Journal of Sandwich Structures and Materials 8: 477-495.